基于人工神经网络的智能化架空线路应变快速解调方法北大核心

为了提高智能化光纤复合架空线路态势感知的实时性,将人工神经网络方法应用于光纤沿线应变解调,确定了神经网络的结构。编程实现了基于洛伦兹模型的最小二乘谱拟合方法和神经网络方法,采用不同信噪比和布里渊频移的布里渊谱训练神经网络,将它们应用于某光纤复合架空线路沿线光纤应变的测量,从不同角度比较了两种方法的计算结果。计算结果表明,神经网络方法能有效获得光纤沿线的布里渊频移进而获得应变,具有与谱拟合方法相似的准确性,但应变解调时间仅约为谱拟合方法的1/20000。研究结果为提高智能光纤复合架空线路态势感知的实时性提供了参考。     

计算机通信及网络远程控制技术的应用与可靠性探究

随着社会的进步和发展,计算机网络通信技术已被应用到实际生活、生产的各个方面,对人们的生活、生产等产生了深刻的影响。为此,文章就计算机通信及网络远程控制技术在实际生活中的应用问题进行了探究,旨在借助先进科技促进社会实现更优质发展。     

Effect of MnOx phase on Pt-based catalyst for enhancing CO/C3H6/NO oxidation performance

To improve the fuel economy, it is crucial to promote the low-temperature performance in eliminating diesel emissions. The work investigates the impact of different MnO₂/Mn₂O₃ phase ratio on the low-temperature performance of Pt-based monolithic diesel oxidation catalyst. Near equal ratio of MnO_x phase could form the three-phase (platinum, MnO₂, Mn₂O₃) interfacial structure, leading to the smaller platinum particle size and exhibiting the higher interface rate (1.6–11.1 times) than other mono-manganese oxide with platinum. Besides, the higher oxygen mobility and more active oxygen species could be contributed to the positive effect of Pt/MnO_x interface, which are prevalent to activate the reactant and greatly enhance the TOF value (1.4–20.8 times). The results imply that the modification of multi-phase metal/oxide interface is potential in dispersing platinum for greatly enhancing the catalytic efficiency.     

配分工艺对中碳Ti-Mo高强Q&P钢组织和性能的影响

摘要：采用盐浴实验、扫描电镜、透射电镜、拉伸实验和磨损实验等手段，研究了配分工艺对中碳Ti Mo钢组织和性能的影响，分析了不同配分工艺处理下的组织演变和性能变化。结果表明，显微组织主要由回火马氏体、渗碳体、(Ti，Mo)C粒子组成。随着配分时间的延长和配分温度的升高，板条马氏体数量减少，马氏体板条厚度增加，边界钝化。此外，随着配分温度从310℃提高至400℃，抗拉强度、硬度和低温冲击韧性同时下降，分别降低约250MPa、56HV和15J。最后，Ms以下温度配分（310℃）试样的耐磨损性能明显优于Ms以上温度配分（400℃）试样。Ms以下温度配分试样磨损表面形貌以塑性变形为主，Ms以上温度配分试样磨损表面以犁沟为主。     

超高效液相色谱⁃四极杆⁃飞行时间质谱对含PET食品接触材料中可迁移非挥发性物质的筛查研究

采用超高效液相色谱⁃四极杆⁃飞行时间高分辨质谱（UPLC⁃Q⁃TOF）对4类不同类型的含聚对苯二甲酸乙二醇酯（PET）材质的食品接触材料在4 %乙酸和50 %乙醇模拟物中的迁移出的非挥发性未知物进行筛查解析。结果表明，产品在4 %乙酸模拟物的迁移风险远小于50 %乙醇模拟物，主要迁移物质为聚合单体形成的寡聚物，抗氧剂、润滑剂、胶黏剂等加工助剂以及生产加工、迁移过程中形成的非有意添加物（NIAS）物质；纯PET材质的产品迁移物质较少，多层复合材料迁移物质较多。复合材质的产品中，PET材质可能在生产时添加了己二酸、癸二酸、新戊二醇等物质，进行了改性处理；此外，部分迁移物质会与模拟物中的乙醇发生反应，生成新的NIAS物质。     

Electrochemical performance of in situ LiFePO4 modified by N-doped graphene for Li-ion batteries

LiFePO₄ modified by N-doped graphene (NG) with a three-dimensional conductive network structure was synthesized via a one-step in situ hydrothermal method. The effects of N amount of NG on the phase structure, morphology, and electrochemical properties of LiFePO₄ are investigated in this study. X-ray diffraction (XRD) results show that doping suitable N amounts in NG do not alter the crystal structure of LiFePO_4, and scanning electron microscopy (SEM) images show that NG can slightly reduce the particle size of LiFePO₄. The high-resolution transmission electron microscopy (HRTEM) results show that the LiFePO₄ particles are well covered and connected by NG. The electrochemical performance confirms that LiFePO₄ modified by 20% N-doped graphene (named LFP/NG-4) displays a perfect specific capacity of 166.6 mAh·g^?1 at a rate of 0.2C and can reach 125 mAh·g^?1 at a rate of 5 C. Electrochemical impedance spectroscopy (EIS) results illustrate that the charge transfer resistance value of the LFP/NG-4 composite is only 58.6 Ω, which is very low compared with LiFePO₄. Cyclic voltammetry (CV) tests indicate that the addition of 20% N-doped graphene can effectively reduce electrode polarization and improve reversibility. The LFP/NG-4 composite with a three-dimensional conductive network structure can be regarded as a promising cathode material for Li-ion batteries.     

基于Matlab的量子激光雷达稳频通信模拟系统设计

传统通信模拟系统设计较为复杂,导致模拟过程消耗能量较大,不能准确模拟稳频通信质量。因此,提出基于Matlab的量子激光雷达稳频通信模拟系统。由于振荡器是雷达形成初始信号源的基础,通过分析振荡电路与相位噪声,获得相位噪声函数与通信频率存在的关系;为确保通信过程的稳定,将准确性与稳定性作为信号质量的评价指标,并采用锁频环稳频技术计算频率偏移程度,根据PID控制算法控制频率,量子激光雷达稳频通信;利用Matlab确定激光器、探测器等硬件组成结构,通过时序与数字阵列的设置完成模拟系统设计。仿真结果表明所提系统结构简便、性能稳定,能够真实模拟出稳频通信的信号质量。     

Challenges and strategies of all-inorganic lead-free halide perovskite solar cells

Hybrid lead halide perovskite solar cells (PSCs) have experienced a rapid development in the past decade and a certified efficiency up to 25.5% has been achieved. However, the presence of toxic lead component and the inherent poor thermal stability of the organic cations in the hybrid lead halide perovskites obstruct the commercial applications of their corresponding photovoltaic devices. Therefore, fabricating high-efficient all-inorganic lead-free PSCs is a promising direction. This review summarizes the related research progress, which mainly focuses on the structural and optoelectronic properties of inorganic lead-free perovskites and devices. In particular, the strategies for improving the properties and stability of Cs–Sn perovskites, as well as enhancing the photovoltaic performance of the corresponding devices are highlighted. An outlook of challenges and future directions regarding to all-inorganic lead-free PSCs are also proposed.     

The influence of textese on adolescents’ perceptions of text message writers

Text messages are characterised by a casual language style, ‘textese’ (e.g., c u on thurs). This study investigated adolescents’ perceptions of the use of different levels of textese in digital messages which varied in their intended recipient (friend, teacher). Grade 8 students in Australia (N = 90, aged 13–14 years) each read six text messages purportedly written by a fellow student, and rated the extent to which they agreed (on a 7-point Likert scale) that the message writer was intelligent, paid attention to detail, used an appropriate writing style, and was friendly. Overall, participants rated message senders most favourably on all measures when they used no textese, and least favourably when they used high levels of textese. This pattern was even stronger when messages were addressed to teachers rather than same-aged friends. The findings suggest that adolescents are sensitive to both writing style and recipient when considering digital messages.